Tamiya TA03 Ball Differential
Part no. 53267 - $25AUD

Tamiya TA03 ball diff spare gear. Note: only large gear in photo is used for M05
Part no. 50704 - $7AUD

Tamiya M03 Assembly Universal shaft set
Part no. 53597 - $23AUD

Tamiya M05
Aluminum Front Upright
Requires 4x 1050 bearings
Part no. 54177 - $35AUD Sold out.

Tamiya M05
Aluminum Rear Upright
Requires 4x 1050 bearings
Part no. 54178 - $35AUD

Tamiya M Chassis reinforced freewheel axle set
Part no. 54183 - $8AUD

Tamiya M05
Aluminum Motor Plate
Part no. 54184 - $23AUD

Tamiya M05 Aluminum racing steering set
Part no. 54191 - $35AUD

Tamiya M05 Aluminum steering link
Part no. 54192 - $15AUD

Tamiya M05 Aluminum steering post
Part no. 54193 - $10AUD

Tamiya M05 Ball Differential set
Part no. 54194 - $29AUD

Tamiya M05 Aluminum turnbuckle steering rod
Part no. 54195 - $10AUD

Tamiya M05Ra
Aluminum Front Upright differently shaped/angled arm to alter bump steer. Requires 4x 1050 bearings
Part no. 54253 - $35AUD

Tamiya M05Ra
Aluminum Rear Upright 2.0 degree adaptor for M05Ra, adds another hole for extra roll centre adjustment.
Part no. 54266 - $10AUD

Tamiya M05 & M06
Aluminum Rear Upright Gives 2.0 degree toe in for extra stability.
Requires 4x 1050 bearings
Part no. 54267 - $35AUD

Tamiya M05 & M06
Aluminum Rear Upright Gives 1.0 degree toe in for less stability.
Requires 4x 1050 bearings
Part no. 54327 - $35AUD

Tamiya M05 heat sink bar set (to suit 54184 M05 motor plate) (2 pieces)
Part no. 92230 - $10AUD

Tamiya M05 Aluminum Front Upright Limited edition Silver.
(same as 54177)
Requires 4x 1050 bearings
Part no. 92231 - $35AUD Sold out.

Tamiya M05
Aluminum Motor Plate Limited Edition Silver
Part no. 92232 - $23AUD

Tamiya M05 Aluminum racing steering set
Limited Edition Silver
Part no. 92233 - $35AUD

Tamiya M05 Aluminum steering link
Limited Edition Silver
Part no. 92234 - $15AUD

Tamiya M05 Aluminum steering post (limited edition silver)
Part no. 92235 - $10AUD

Tamiya M05 Aluminum turnbuckle steering rod
Limited Edition Silver
Part no. 92236 - $10AUD

Tamiya M05 & M06
Aluminum Rear Upright Gives 2.0 degree toe in for extra stability. ( Limited edition silver)
Requires 4x 1050 bearings
Part no. 92237 - $35AUD

Tamiya M05S Aluminum Rear Suspension Mount
Limited Edition Silver
Part no. 92238 - $18AUD

Tamiya Touring car hard joint cup set for TA03 Ball differential
Part no. 53217 - $8AUD

Tamiya 5mm short adjuster (8 pieces) . Use on rear upper links
Part no. 50797 - $2.50AUD Sold out.

Tamiya M05 low friction king pin (4pcs), lightweight.
Part no. 54237 - $6AUD

Tamiya 4mm aluminum flange nut serrated. Limited edition blue. Never lose that LH front wheel again!
Part no. 42143 - $6AUD Sold out.

Tamiya M05 front aluminum damper stay (blue)
Use with 54000.
Part no. 54236 - $16AUD

Tamiya 4mm Hard Lock Nut & Spacer set. Use to adjust cars track. Can be used as a tuning aid for stability.
Part no. 53448 - $9AUD

To suit Tamiya Universals part no. 53597
Your universals will be bullet proof with these locking pins!
Part no. LP1 - $2AUD

Tamiya M-05Ra reinforced ball diff cup set

Part no. 54238 - $20AUD

Tamiya M-05 lightweight aluminum battery holder

Part no. 54224 - $23AUD

Tamiya M05 Stabilizer Set (front & rear)
Part no. 54239 - $18AUD

Tamiya Swing shaft protector. Can be used with ABR oil diff, Spice oil diff or M05 Ball diff 54194.

Part no. 53890 - $5AUD

Team ABR oil filled gear diff to suit M05 only. For this diff I recommend 100,000wt oil maximum. Similar in construction to the Spec R oil filled touring car diffs.

Part no. ABRDIFF - $45 Sold out.

Spice oil filled gear diff to suit M05/M06 only. For this diff I recommend 100,000wt oil maximum. Similar in construction to the Spec R oil filled touring car diffs. Identical to ABR diff.

Part no. SPCDIFF - $45

Yeah Racing 100,000wt
Use in ABR oil filled gear diffs to provide extra pull out of corners.

Part no. YR100K - $7.50

Yeah Racing 300,000wt
Use in oil filled gear diffs to provide extra pull out of corners.

Part no. YR300K - $7.50 Sold out

Kyosho 500,000wt silicon
Use in oil filled gear diffs to provide maximum pull out of corners.

Part no. KY500K - $18
Sold out.

Tamiya M05 Carbon Damper Stay (front). Made from 3mm thick carbon.
Part no. 54320 - $11AUD

Yeah Racing body clips with body protect sponge. Never lose a body pin again. Makes it easier to use body pins.

Part no. YRClip - $4

Tamiya Lightweight Hollow stainless steel shaft set.
6 grams lighter than standard item.
Part no. 54319 - $3AUD

Tamiya M03 Hollow
Carbon gear shaft. 8 grams lighter than standard item.
Part no. 53390 - $8AUD

Tamiya Cross joints for assembly universal shaft set
Part no. 53500 - $7AUD

Tamiya M05 heat sink bar set (to suit 54184 M05 motor plate) (2 pieces)
Part no. 53924 - $10AUD

Tamiya Titanium Hex Head Screw for M05 Motor mount
Part no. 54214 - $4AUD

Tamiya Hard Fluorine coated 0.6 aluminum pinion 20T
Part no. 53509 - $8AUD

Kawada 20 tooth hardened super duralumin pinion.

Part no. K20 - $8AUD
Sold out.

Venom M05 front solid axle.
Part no. V4202 - $29AUD

Tamiya Hi-torque servo saver (white)

Part no. 50473 - $9AUD

Pair of bearings to suit the M05 racing steering set 54191. These are the extremely small bearings.
Part no. M05STBG-$3AUD

Tamiya 5.5mm diameter aluminum spacer set.
Part no. 53539 - $8AUD Sold out

Tamiya diameter 3mm shim set .
Part no. 53585 - $6AUD Sold out.

Tamiya diameter 5mm shim set .
Part no. 53587 - $6AUD

Tamiya diameter 6mm shim set.
Part no. 53726 - $7.50AUD

Tamiya M05 Adjustable upper arm set
Part no. 54182 - $8AUD

Tamiya low friction 5mm adjuster. To suit steering linkage.
Part no. 53601 - $4.50AUD

Yeah Racing body clips with body protect sponge. Never lose a body pin again. Makes it easier to use body pins.

Part no. YRClip - $4

Tamiya body clips - large.
4 pieces.

Part no. ClipLG - $1
Sold out.

Tamiya body clips - small.
4 pieces.

Part no. ClipSML - $1

Tamiya Hi-torque servo saver (black)

Part no. 51000 - $9AUD Sold out.

Tamiya Aluminum Horn for Hi-Torque servo saver (black). Use with 51000
Part no. 84082 - $15AUD

Tamiya Aluminum Horn for Hi-Torque servo saver (blue). Use with 51000
Part no. 54121 - $15AUD

Tamiya Clamp type aluminum wheel hub (6mm)
Part no. 53569 - $17AUD

Tamiya Clamp type blue aluminum wheel hub (4mm)
Part no. 53570 - $17AUD

Tamiya Clamp type blue aluminum wheel hub (5mm)
Part no. 53823 - $17AUD

Yeah Racing M05 custom bearing set. Using alloy uprights? know your bearing size? just need 1 or 2 bearings? email me the sizes you need and I'll make up a custom kit. Bearings in stock are: 1150, 1050, 850.

Part no. BB-$1AUD each.

Yeah Racing M05 bearing set - to suit kit standard M05. Consists of 12x 1150 and 6x 850 bearings.

Part no. YRM05 - $18AUD

Tamiya Clamp type black aluminum wheel hub (5mm) Limited edition.
Part no. 84011 - $17AUD

Tamiya 5mm aluminum ball connector blue
Part no. 53642 - $8AUD

Tamiya 4mm aluminum lock nuts, blue 5pcs
Part no. 53159 - $6AUD

Tamiya 3mm tungsten carbide diff ball set
Part no. 53124 - $19AUD