This is a new section dedicated to running your Mini at the Velodrome or for high speed runs. Items found here are not legal for use under normal VORTEC mini class rules. For high speed runs anything goes and the items here will help you push your mini to the limit!
Hobbywing EZRUN
5.5Turn brushless motor with 60amp ESC
and program card. Version 2. This is the default motor for running mini at the Velodrome.
Part no. HW5T -
$110AUD |
Team ABR 36 tooth spur to suit M03/M04/M05/M06. Used with Kawada pinions this will give you more top speed / taller gear ratio.
Part no. ABR36T-
$18AUD |
Team ABR 33 tooth spur to suit M03/M04/M05/M06. Used with Kawada pinions this will give you even more top speed / taller gear ratio. As used in the 100kmh mini.
Part no. ABR33T-
$18AUD Sold out |
Kawada 21 tooth hardened super duralumin pinion.
Part no. K21 -
$8AUD |
Kawada 22 tooth hardened super duralumin pinion.
Part no. K22 -
$8AUD
|
Kawada 23 tooth hardened super duralumin pinion. As large as you can go without dremeling the chassis. As used in the 100kmh mini.
Part no. K23 -
$8AUD
|
Kawada 24 tooth hardened super duralumin pinion.
If using with M03 or M05 it requires dremeling of the chassis to fit.
Part no. K24 -
$8AUD
|
Jaco Nitro Shoes
Foams
35 shore, Front 26mm.
Use on the front or rear of your mini at the velodrome
Part no. JAC35 - $12AUD
|
Jaco Nitro Shoes
Foams
38 shore, Front 26mm.
Use on the front or rear of your mini at the velodrome
Part no. JAC38 - $12AUD
|
Matrix mini Cooper S
to suit M03L or M05L. Comes with rear wing, light buckets, decal sheet & window masks. Best choice for a velodrome body.
Part no. Matmini - $25AUD
|
|
|
